mrp timer leave

Syntax

mrp timer leave timer-value

undo mrp timer leave

View

Layer 2 Ethernet port view, Layer 2 aggregate interface view, port group view

Default level

2: System level

Parameters

timer-value: Leave timer value (in centiseconds). The Leave timer must be greater than two times the Join timer, less than the LeaveAll timer, and a multiple of 20.

Description

Use mrp timer leave to set the Leave timer.

Use undo mrp timer leave to restore the default.

By default, the Leave timer is 60 centiseconds.

You will fail to restore the default Leave timer if the default Leave timer is not greater than two times the Join timer or not less than the LeaveAll timer.

Related commands: display mvrp running-status, mrp timer join, and mrp timer leaveall.

Examples

# Set the Leave timer to 100 centiseconds. (Suppose the Join and LeaveAll timer use their default settings)

<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] mrp timer leave 100