display mvrp state
Syntax
display mvrp state interface interface-type interface-number vlan vlan-id [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
0: Visit level
Parameters
interface interface-type interface-number: Displays the MVRP state of an interface specified by its type and number.
vlan vlan-id: Displays the MVRP state of an interface in an VLAN specified by its VLAN ID, which ranges from 1 to 4094.
|: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display mvrp state to display the MVRP state of an interface in a VLAN.
Examples
# Display the MVRP state of port Ethernet 1/0/1 in VLAN 2.
<Sysname> display mvrp state interface ethernet 1/0/1 vlan 2 MVRP state of VLAN 2 on port Eth1/0/1 Port VLAN App-state Reg-state ----------- ------ ----------- ----------- Eth1/0/1 2 VP IN
Table 49: Command output
Field | Description |
---|---|
MVRP state of VLAN 2 on port Eth1/0/1 | MVRP state of Ethernet 1/0/1 in VLAN 2. |
App-state | Declaration state, which indicates the state of the attribute that the local participant declares to the remote participant. The state can be VO, VP, VN, AN, AA, QA, LA, AO, QO, AP, QP, or LO. Each state consists of two letters. The first letter indicates the state:
The second letter indicates the membership state:
For example, VP indicates "Very anxious, Passive member". |
Reg-state | Registration state of the attribute declared by remote participants on the local participant. The state can be IN, LV, or MT:
|