display lldp local-information

Syntax

display lldp local-information [ global | interface interface-type interface-number ] [ | { begin | exclude | include } regular-expression ]

View

Any view

Default level

1: Monitor level

Parameters

global: Displays the global LLDP information to be sent.

interface interface-type interface-number: Specifies a port by its type and number.

|: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

exclude: Displays all lines that do not match the specified regular expression.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Description

Use display lldp local-information to display the LLDP information to be sent, which will be contained in the LLDP TLVs and sent to neighbor devices.

If no keyword or argument is specified, this command displays all LLDP information to be sent, which includes the following:

The global LLDP information.
The LLDP information about the LLDP-enabled ports in up state.

Examples

# Display all LLDP information to be sent.

<Sysname> display lldp local-information
Global LLDP local-information:
  Chassis ID         : 00e0-fc00-5600
  System name        : Sysname
  System description : HPE Comware Platform Software
  System capabilities supported : Bridge,Router
  System capabilities enabled   : Bridge,Router

  MED information
  Device class: Connectivity device


  (MED inventory information of master board)
  HardwareRev               : REV.A
  FirmwareRev               : 109
  SoftwareRev               : 5.20 Alpha 2101
  SerialNum                 : NONE
  Manufacturer name         : HPE
  Model name                : HPE Comware
  Asset tracking identifier : Unknown
LLDP local-information of port 1[Ethernet1/0/1]:
  Port ID subtype  : Interface name
  Port ID          : Ethernet1/0/1
  Port description : Ethernet1/0/1 Interface

  Management address type           : ipv4
  Management address                : 192.168.1.11
  Management address interface type : IfIndex
  Management address interface ID   : 54
  Management address OID            : 0

  Port VLAN ID(PVID): 1

  Port and protocol VLAN ID(PPVID) : 1
  Port and protocol VLAN supported : Yes
  Port and protocol VLAN enabled   : No

  VLAN name of VLAN 1: VLAN 0001

  Auto-negotiation supported : Yes
  Auto-negotiation enabled   : Yes
  OperMau                    : speed(100)/duplex(Full)

  Power port class          : PSE
  PSE power supported       : Yes
  PSE power enabled         : Yes
  PSE pairs control ability : Yes
  Power pairs               : Signal
  Port power classification : Class 0

  Link aggregation supported : Yes
  Link aggregation enabled   : No
  Aggregation port ID        : 0

  Maximum frame Size: 1536

  MED information
  Media policy type        : Unknown
  Unknown Policy           : Yes
  VLAN tagged              : No
  Media policy VlanID      : 0
  Media policy L2 priority : 0
  Media policy Dscp        : 0

  PoE PD power source       : PSE 
  Port PD Priority          : Low 
  Port available power value: 12.9(w)

Table 43: Command output

Field	Description
Global LLDP local-information	Global LLDP information to be sent.
Chassis ID	Bridge MAC address of the device.
System capabilities supported	Supported capabilities: Bridge—Switching is supported. Router—Routing is supported.
System capabilities enabled	Enabled capabilities: Bridge—Switching is enabled. Router—Routing is enabled.
Device class	MED device class: Connectivity device—Network device. Class I—Normal terminal device. It requires the basic LLDP discovery services. Class II—Media terminal device. It supports media streams, and can also function as a normal terminal device. Class III—Communication terminal device. It supports the IP communication systems of end users, and can also function as a normal terminal device or media terminal device.
MED inventory information of master board	MED inventory information of the device.
HardwareRev	Hardware version.
FirmwareRev	Firmware version.
SoftwareRev	Software version.
SerialNum	Serial number.
Manufacturer name	Device manufacturer.
Model name	Device model.
LLDP local-information of port 1	LLDP information to be sent out of port 1.
Port ID subtype	Port ID type, which can be MAC address or interface name.
Port ID	Port ID, the value of which depends on the port ID subtype.
Management address interface type	Numbering type of the interface identified by the management address.
Management address interface ID	Index of the interface identified by the management address.
Management address OID	Management address object ID.
Port and protocol VLAN ID(PPVID)	Port protocol VLAN ID.
Port and protocol VLAN supported	Indicates whether or not protocol VLAN is supported on the port.
Port and protocol VLAN enabled	Indicates whether or not protocol VLAN is enabled on the port.
VLAN name of VLAN 1	Name of VLAN 1.
Auto-negotiation supported	Indicates whether or not auto-negotiation is supported on the port.
Auto-negotiation enabled	Indicates whether or not auto-negotiation is enabled on the port.
OperMau	Speed and duplex state of the port.
PoE supported	Indicates whether or not PoE is supported on the port.
Power port class	PoE port class when the device supports PoE. PSE indicates that the device is a power sourcing equipment.
PSE power supported	Indicates whether the device can operate as a PSE.
PSE power enabled	Indicates whether the device is operating as a PSE.
PSE pairs control ability	Indicates whether the pair selection ability is available.
Power pairs	Power supply mode: Signal—Uses data pairs to supply power. Spare—Uses spare pairs to supply power.
Port power classification	Power class of the PD: Class 0 Class 1 Class 2 Class 3 Class 4
Link aggregation supported	Indicates whether link aggregation is supported.
Link aggregation enabled	Indicates whether link aggregation is enabled.
Aggregation port ID	Aggregation group ID, which is 0 when link aggregation is disabled.
MED information	MED LLDP information.
Media policy type	Media policy type: unknown voice voiceSignaling guestVoice guestVoiceSignaling softPhoneVoice videoconferencing streamingVideo videoSignaling
Unknown Policy	Indicates whether the media policy is unknown.
VLAN tagged	Indicates whether packets of the media VLAN are tagged.
Media Policy VlanID	ID of the media VLAN.
Media Policy L2 priority	Layer 2 priority.
Media Policy Dscp	DSCP precedence.
Location format	Location information format: Invalid—The format of the location information is invalid. Coordinate-based LCI—The location information is coordinate-based. Civic Address LCI—Typical address information. ECS ELIN—Telephone number for urgencies.
Location Information	When the port is allowed to advertise Location Identification TLVs, this field displays the location information of the device.
PoE PD power source	PD power source type: Unknown—Unknown power supply. PSE—PSE power supply. Local—Local power supply. PSE and local—PSE and local power supplies.
Port PD Priority	PoE power receiving priority of PD ports: Unknown. Critical. High. Low.
Port available power value	Available PoE power on PSE ports, or power needed on PD ports, in watts.

prev	up	next
LLDP configuration commands	home	display lldp neighbor-information