qinq ethernet-type
Syntax
qinq ethernet-type hex-value
undo qinq ethernet-type
View
System view
Default level
2: System level
Parameters
hex-value: Specifies a hexadecimal tag protocol identifier (TPID) value, ranging from 0x0001 to 0xFFFF. However, do not set it to any of the protocol type values listed in Table 42.
Table 42: Common protocol type values
Protocol type | Value |
|---|---|
ARP | 0x0806 |
PUP | 0x0200 |
RARP | 0x8035 |
IP | 0x0800 |
IPv6 | 0x86DD |
PPPoE | 0x8863/0x8864 |
MPLS | 0x8847/0x8848 |
IPX/SPX | 0x8137 |
IS-IS | 0x8000 |
LACP | 0x8809 |
802.1X | 0x888E |
Cluster | 0x88A7 |
Reserved | 0xFFFD/0xFFFE/0xFFFF |
Description
Use qinq ethernet-type to configure the TPID value in VLAN tags.
Use undo qinq ethernet-type to restore the TPID value in VLAN tags to the system default.
By default, the TPID value in VLAN tags is 0x8100.
Examples
# Set the TPID value in the VLAN tags to 0x8200.
<Sysname> system-view [Sysname] qinq ethernet-type 8200