garp timer leaveall
Syntax
garp timer leaveall timer-value
undo garp timer leaveall
View
System view
Default level
2: System level
Parameters
timer-value: Leaveall timer (in centiseconds), which must be a multiple of 5 and range from the maximum Leave timer on the device (exclusive) to 32765 (inclusive).
Description
Use garp timer leaveall to set the GARP LeaveAll timer.
Use undo garp timer leaveall to restore the default. This may fail if the default is beyond the valid value range for the LeaveAll timer.
By default, the LeaveAll timer is 1000 centiseconds.
NOTE: To keep the dynamic VLANs learned through GVRP stable, do not set the LeaveAll timer smaller than its default value. | ||
Related commands: display garp timer and garp timer leave.
Examples
# Set the leaveall timer to 2000 centiseconds, assuming that the Leave timer on every port is set to 60 centiseconds.
<Sysname> system-view [Sysname] garp timer leaveall 2000