garp timer join

Syntax

garp timer join timer-value

undo garp timer join

View

Ethernet interface view, Layer-2 aggregate interface view, port group view

Default level

2: System level

Parameters

timer-value: Join timer (in centiseconds), which must be a multiple of 5 and range from twice the Hold timer (inclusive) and half the Leave timer (inclusive).

Description

Use garp timer join to set the GARP Join timer for an Ethernet port, Layer-2 aggregate interface, or all ports in a port group.

Use undo garp timer join to restore the default of the GARP Join timer. This may fail if the default is beyond the valid value range for the Join timer.

By default, the Join timer is set to 20 centiseconds.

Related commands: display garp timer, garp timer hold, and garp timer leave.

Examples

# Set the GARP Join timer to 25 centiseconds, assuming that both the Hold timer and the Leave timer are using the default.

<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] garp timer join 25