voice vlan enable
Syntax
voice vlan vlan-id enable
undo voice vlan [ vlan-id ] enable
View
Layer 2 Ethernet interface view
Default level
2: System level
Parameters
vlan-id: Specifies a VLAN ID, in the range of 2 to 4096.
Description
Use voice vlan enable to enable the voice VLAN feature and configure a VLAN as the voice VLAN for a port.
Use undo voice vlan enable to disable the voice VLAN feature on a port.
By default, the voice VLAN feature is disabled on ports.
Use this command only on a hybrid or trunk port operating in automatic voice VLAN assignment mode.
Examples
# Enable the voice VLAN feature on Ethernet 1/0/1.
<Sysname> system-view [Sysname] interface ethernet 1/0/1 [Sysname-Ethernet1/0/1] voice vlan 2 enable