display protocol-vlan interface
Syntax
display protocol-vlan interface { interface-type interface-number1 [ to interface-type interface-number2 ] | all } [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
2: System level
Parameters
interface-type interface-number1: Specifies an interface by its type and number.
interface-type interface-number1 to interface-type interface-number2: Specifies an interface range.
all: Displays information about protocol-based VLANs on all ports.
|: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display protocol-vlan interface to display information about protocol-based VLANs for the specified ports.
Examples
# Display protocol-based VLAN information on Ethernet 1/0/1.
[Sysname] display protocol-vlan interface ethernet 1/0/1 Interface: Ethernet1/0/1 VLAN ID Protocol Index Protocol Type ====================================================== 2 0 ipv6 3 0 ipv4
Table 35: Command output
Field | Description |
---|---|
VLAN ID | ID of the protocol-based VLAN bound to the port |
Protocol Index | Protocol template index |
Protocol Type | Protocol type specified by the protocol template |