stp region-configuration
Syntax
stp region-configuration
undo stp region-configuration
View
System view
Default level
2: System level
Parameters
None
Description
Use stp region-configuration to enter MST region view.
Use undo stp region-configuration to restore the default MST region configurations.
These are the default settings for the MST region:
The MST region name of the device is the MAC address of the device.
All VLANs are mapped to the CIST.
The MSTP revision level is 0.
After you enter MST region view, you can configure the MST region-related parameters, including the region name, VLAN-to-instance mappings, and revision level.
Examples
# Enter MST region view.
<Sysname> system-view [Sysname] stp region-configuration [Sysname-mst-region]