display port-isolate group

Syntax

display port-isolate group [ | { begin | exclude | include } regular-expression ]

Any view

1: Monitor level

|: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

exclude: Displays all lines that do not match the specified regular expression.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Use display port-isolate group to display port isolation group information.

# Display port isolation group information.

<Sysname> display port-isolate group
 Port-isolate group information:
 Uplink port support: NO
 Group ID: 1
 Group members:
    Ethernet1/0/2

Table 20: Command output

Field	Description
Port-isolate group information	Display port isolation group information.
Uplink port support	The switch series does not support configuring an uplink port in the port isolation group.
Group ID	Isolation group number. It can only be 1.
Group members	Isolated ports in the isolation group.

prev	up	next
Port isolation configuration commands	home	port-isolate enable