display link-aggregation load-sharing mode

Syntax

display link-aggregation load-sharing mode [ | { begin | exclude | include } regular-expression ]

Any view

1: Monitor level

|: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

exclude: Displays all lines that do not match the specified regular expression.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Use display link-aggregation load-sharing mode to display global link-aggregation load sharing criteria.

# Display the global link-aggregation load sharing criteria.

<Sysname>display link-aggregation load-sharing mode
Link-Aggregation Load-Sharing Mode:
Layer 2 traffic: source-mac address

Layer 3 traffic: destination-ip address, source-ip address

Table 16: Command output

Field	Description
Link-Aggregation Load-Sharing Mode	Global link-aggregation load sharing criteria.
Layer 2 traffic: source-mac address	Default link-aggregation load sharing criteria for Layer 2 traffic. In this sample output, the criteria are the source MAC address of packets.
Layer 3 traffic: destination-ip address, source-ip address	Default link-aggregation load sharing criteria for Layer 3 traffic. In this sample output, the criteria are the source and destination IP addresses of packets.

prev	up	next
display lacp system-id	home	display link-aggregation member-port