mac-address information enable (interface view)

Syntax

mac-address information enable { added | deleted }

undo mac-address information enable { added | deleted }

View

Layer 2 Ethernet interface view

Default level

1: Monitor level

Parameters

added: Enables the device to record security information when a new MAC address is learned on the Ethernet port.

deleted: Enables the device to record security information when an existing MAC address is deleted.

Description

Use mac-address information enable to enable MAC Information on the Layer 2 Ethernet interface.

Use undo mac-address information enable to restore the default.

By default, MAC Information is disabled on a Layer 2 Ethernet interface.

This command is not supported on aggregate interfaces.

To enable MAC Information on an Ethernet interface, enable MAC Information globally.

Examples

# Enable MAC Information on Ethernet 1/0/1.

<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] mac-address information enable added