storm-constrain enable trap
Syntax
storm-constrain enable trap
undo storm-constrain enable trap
View
Ethernet interface view
Default level
2: System level
Parameters
None
Description
Use storm-constrain enable trap to enable an Ethernet interface to send storm control threshold event traps. Triggering events include traffic exceeding the upper threshold and traffic falling below the lower threshold from the upper threshold.
Use undo storm-constrain enable trap to disable trap message sending.
By default, a storm control-enabled interface sends traps when monitored traffic exceeds the upper threshold or falls below the lower threshold from the upper threshold.
Examples
# Disable Ethernet 1/0/1 from sending out storm control threshold event traps.
<Sysname> system-view [Sysname] interface ethernet 1/0/1 [Sysname-Ethernet1/0/1] undo storm-constrain enable trap