flow-interval
Syntax
flow-interval interval
undo flow-interval
View
Ethernet interface view
Default level
2: System level
Parameters
interval: Sets the statistics polling interval, in seconds. It ranges from 5 to 300 and must be a multiple of 5.
Description
Use flow-interval to set the interface statistics polling interval.
Use undo flow-interval to restore the default interval.
In system view, use the flow-interval command to set the statistics polling interval for all interfaces.
In Ethernet interface view, use the flow-interval command to set the statistics polling interval for the interface.
Examples
# Set the statistics polling interval to 100 seconds on Ethernet 1/0/1.
<Sysname> system-view [Sysname] interface ethernet 1/0/1 [Sysname-Ethernet1/0/1] flow-interval 100