display loopback-detection
Syntax
display loopback-detection [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display loopback-detection to display the status of the loopback detection function.
If loopback detection is enabled, this command also displays the detection interval and ports in a loop condition.
Examples
# Display information about loopback detection.
<Sysname> display loopback-detection Loopback detection is running. Detection interval is 30 seconds. No port is detected with loopback.
Table 7: Command output
Field | Description |
---|---|
Detection interval time is 30 seconds. | Loopback detection interval is 30 seconds. |
No port is detected with loopback. | No loops are detected on ports. |