reset arp detection statistics attack-source
Use reset arp detection statistics attack-source to clear statistics for ARP attack sources.
Syntax
In standalone mode:
reset arp detection statistics attack-source [ slot slot-number ]
In IRF mode:
reset arp detection statistics attack-source [ chassis chassis-number slot slot-number ]
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command clears ARP attack source statistics for the active MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number argument represents the member ID of the IRF member device. The slot-number argument represents the slot number of the card. If you do not specify a card, this command clears ARP attack source statistics for the global active MPU. (In IRF mode.)
Examples
# Clear statistics for ARP attack sources.
<Sysname> reset arp detection statistics attack-source
Related commands
arp detection enable
display arp detection statistics attack-source