display arp detection statistics attack-source
Use display arp detection statistics attack-source to display statistics for ARP attack sources.
Syntax
In standalone mode:
display arp detection statistics attack-source slot slot-number
In IRF mode:
display arp detection statistics attack-source chassis chassis-number slot slot-number
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command displays ARP attack source statistics for the active MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number argument represents the member ID of the IRF member device. The slot-number argument represents the slot number of the card. If you do not specify a card, this command displays ARP attack source statistics for the global active MPU. (In IRF mode.)
Examples
# Display statistics for ARP attack sources on slot 1.
<Sysname> display arp detection statistics attack-source slot 1 Interface VLAN MAC address IP address Number Time FGE1/0/1 1 0005-0001-0001 10.1.1.14 24 17:09:56 03-27-2017
Table 85: Command output
Field | Description |
---|---|
Interface | Receiving interface of ARP attack packets. |
VLAN | VLAN to which ARP attack packets belong. |
MAC address | Sender MAC address in ARP attack packets. |
IP address | Sender IP address in ARP attack packets. |
Number | Number of ARP attack packets dropped by ARP attack detection. |
Time | The most recent time when ARP attack detection dropped an ARP attack packet. |
Related commands
arp detection enable