display arp source-mac
Use display arp source-mac to display ARP attack entries detected by source MAC-based ARP attack detection.
Syntax
In standalone mode:
display arp source-mac { interface interface-type interface-number | slot slot-number }
In IRF mode:
display arp source-mac { chassis chassis-number slot slot-number | interface interface-type interface-number }
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command displays ARP attack entries for the active MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number argument represents the member ID of the IRF member device. The slot-number argument represents the slot number of the card. If you do not specify a card, this command displays ARP attack entries for the global active MPU. (In IRF mode.)
Examples
# Display the ARP attack entries detected by source MAC-based ARP attack detection on FortyGigE 1/0/1.
<Sysname> display arp source-mac interface Source-MAC VLAN ID Interface Aging-time 23f3-1122-3344 4094 FGE1/0/1 10
Table 84: Command output
Field | Description |
---|---|
Source-MAC | Source MAC address of the attack. |
VLAN ID | ID of the VLAN in which the attack was detected. |
Interface | Interface on which the attack was detected. |
Aging-time | Aging time for the ARP attack entry, in seconds. |