snmp-agent trap enable arp
Use snmp-agent trap enable arp to enable SNMP notifications for ARP.
Use undo snmp-agent trap enable arp to disable SNMP notifications for ARP.
Syntax
snmp-agent trap enable arp [ rate-limit ]
undo snmp-agent trap enable arp [ rate-limit ]
Default
SNMP notifications for ARP is disabled.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
rate-limit: Specifies the ARP packet rate limit feature.
Usage guidelines
After you enable SNMP notifications for ARP, the device generates a notification that includes the highest threshold-crossed ARP packet rate within the sending interval.
For ARP event notifications to be sent correctly, you must also configure SNMP on the device. For more information about SNMP configuration, see the network management and monitoring configuration guide for the device.
Examples
# Enable SNMP notifications for ARP packet rate limit.
<Sysname> system-view [Sysname] snmp-agent trap enable arp rate-limit