arp rate-limit log interval
Use arp rate-limit log interval to set the notification and log message sending interval for ARP packet rate limit.
Use undo arp rate-limit log interval to restore the default.
Syntax
arp rate-limit log interval interval
undo arp rate-limit log interval
Default
The device sends notifications or log messages every 60 seconds when the rate of ARP packets received on an interface exceeds the limit.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
interval: Specifies an interval in the range of 1 to 86400 seconds.
Usage guidelines
To change the default interval and activate it, you must enable ARP packet rate limit and enable sending notifications or log messages for ARP packet rate limit.
Examples
# Set the device to send notifications and log messages every 120 seconds when the rate of ARP packets received on an interface exceeds the limit.
<Sysname> system-view [Sysname] arp rate-limit log interval 120
Related commands
arp rate-limit
arp rate-limit log enable
snmp-agent trap enable arp