arp rate-limit log enable

Use arp rate-limit log enable to enable logging for ARP packet rate limit.

Use undo arp rate-limit log enable to disable logging for ARP packet rate limit.

Syntax

arp rate-limit log enable

undo arp rate-limit log enable

Default

Logging for ARP packet rate limit is disabled.

Views

System view

Predefined user roles

network-admin

mdc-admin

Usage guidelines

When logging for ARP packet rate limit is enabled, the device sends the highest threshold-crossed ARP packet rate within the sending interval in a log message to the information center. You can configure the information center module to set the log output rules. For more information about information center, see Network Management and Monitoring Configuration Guide.

Examples

# Enable logging for ARP packet rate limit.

<Sysname> system-view
[Sysname] arp rate-limit log enable