arp resolving-route probe-interval

Use arp resolving-route probe-interval to set the interval at which the device probes ARP blackhole routes.

Use undo arp resolving-route probe-interval to restore the default.

Syntax

arp resolving-route probe-interval interval

undo arp resolving-route probe-interval

Default

The device probes ARP blackhole routes every 1 second.

Views

System view

Predefined user roles

network-admin

mdc-admin

Parameters

interval: Specifies the probe interval in the range of 1 to 5 seconds.

Examples

# Configure the device to probe ARP blackhole routes every 3 seconds.

<Sysname> system-view
[Sysname] arp resolving-route probe-interval 3

Related commands

arp resolving-route enable

arp resolving-route probe-count