arp resolving-route probe-count
Use arp resolving-route probe-count to set the number of ARP blackhole route probes for each unresolved IP address.
Use undo arp resolving-route probe-count to restore the default.
Syntax
arp resolving-route probe-count count
undo arp resolving-route probe-count
Default
The device performs three ARP blackhole route probes for each unresolved IP address.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
count: Sets the number of probes, in the range of 1 to 25.
Examples
# Configure the device to perform five ARP blackhole route probes for each unresolved IP address.
<Sysname> system-view [Sysname] arp resolving-route probe-count 5
Related commands
arp resolving-route enable
arp resolving-route probe-interval