display attack-defense scan attacker ipv6
Use display attack-defense scan attacker ipv6 to display information about IPv6 scanning attackers.
Syntax
In standalone mode:
display attack-defense scan attacker ipv6 [ [ local ] [ slot slot-number ] ] [ count ]
In IRF mode:
display attack-defense scan attacker ipv6 [ [ local ] [ chassis chassis-number slot slot-number ] ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
local: Specifies the device.
slot slot-number: Specifies a card by its slot number. This option is available only when you specify the device. If you do not specify a card, this command displays information about IPv6 scanning attackers for all cards. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number argument represents the member ID of the IRF member device. The slot-number argument represents the slot number of the card. This option is available only when you specify the device. If you do not specify a card, this command displays information about IPv6 scanning attackers for all cards. (In IRF mode.)
count: Displays the number of matching IPv6 scanning attackers.
Usage guidelines
If you do not specify any parameters, this command displays information about all IPv6 scanning attackers.
Examples
# (In standalone mode.) Display information about all IPv6 scanning attackers.
<Sysname> display attack-defense scan attacker ipv6 Slot 1: IPv6 address VPN instance Detected on Duration(min) 1002::20 -- Local 782 Slot 2: IPv6 address VPN instance Detected on Duration(min)
# (In standalone mode.) Display the number of IPv6 scanning attackers.
<Sysname> display attack-defense scan attacker ipv6 count Slot 1: Totally 1 attackers. Slot 2: Totally 0 attackers.
Table 76: Command output
Field | Description |
|---|---|
Totally 1 attackers | Total number of IPv6 scanning attackers. |
IPv6 address | IPv6 address of the attacker. |
VPN instance | MPLS L3VPN instance to which the attacker IPv6 address belongs. If the attacker IPv6 address is on the public network, this field displays hyphens (--). |
Detected on | Where the attack is detected: the device (Local). |
Duration(min) | The amount of time the attack lasts, in minutes. |
Related commands
display attack-defense scan victim ipv6
scan detect