display ssl server-policy

Use display ssl server-policy to display SSL server policy information.

Syntax

display ssl server-policy [ policy-name ]

Views

Any view

Predefined user roles

network-admin

network-operator

mdc-admin

mdc-operator

Parameters

policy-name: Specifies an SSL server policy by its name, a case-insensitive string of 1 to 31 characters. If you do not specify a policy name, this command displays information about all SSL server policies.

Examples

# Display information about the SSL server policy policy1.

<Sysname> display ssl server-policy policy1
 SSL server policy: policy1
     PKI domain: server-domain
     Ciphersuites:
         DHE_RSA_AES_128_CBC_SHA
         RSA_AES_128_CBC_SHA
     Session cache size: 600
     Caching timeout: 3600 seconds
     Client-verify: Enabled

Table 67: Command output

Field	Description
Caching timeout	Session cache timeout time in seconds.
Client-verify	SSL client authentication mode, including: Disabled—SSL client authentication is disabled. Enabled—SSL client authentication is mandatory. Optional—SSL client authentication is optional.

Field

Description

Caching timeout

Session cache timeout time in seconds.

Client-verify

SSL client authentication mode, including:

Disabled—SSL client authentication is disabled.
Enabled—SSL client authentication is mandatory.
Optional—SSL client authentication is optional.

prev	up	next
display ssl client-policy	home	pki-domain (SSL client policy view)