ssh client source
Use ssh client source to configure the source IPv4 address for SSH packets that are sent by the Stelnet client.
Use undo ssh client source to restore the default.
Syntax
ssh client source { interface interface-type interface-number | ip ip-address }
undo ssh client source
Default
The source IPv4 address for outgoing SSH packets is not configured. The Stelnet client uses the primary IPv4 address of the output interface in the matching routing entry as the source address of outgoing SSH packets.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
interface interface-type interface-number: Specifies a source interface by its type and number. The Stelnet client uses the primary IPv4 address of the interface as the source address of outgoing SSH packets.
ip ip-address: Specifies a source IPv4 address.
Usage guidelines
This command takes effect on all Stelnet connections. The source IPv4 address specified in the ssh2 command takes effect only on the current Stelnet connection. If you specify the source IPv4 address both in this command and the ssh2 command, the source IPv4 address specified in the ssh2 command takes effect.
If you execute this command multiple times, the most recent configuration takes effect.
Examples
# Specify 192.168.0.1 as the source IPv4 address for SSH packets.
<Sysname> system-view [Sysname] ssh client source ip 192.168.0.1
Related commands
display ssh client source