sftp client source
Use sftp client source to configure the source IPv4 address for SFTP packets that are sent by the SFTP client.
Use undo sftp client source to restore the default.
Syntax
sftp client source { interface interface-type interface-number | ip ip-address }
undo sftp client source
Default
The source IPv4 address for outgoing SFTP packets is not configured. The SFTP client uses the primary IPv4 address of the output interface in the matching routing entry as the source IPv4 address of outgoing SFTP packets.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
interface interface-type interface-number: Specifies a source interface by its type and number. The SFTP client uses the primary IPv4 address of the interface as the source address of outgoing SFTP packets.
ip ip-address: Specifies a source IPv4 address.
Usage guidelines
This command takes effect on all SFTP connections. The source IPv4 address specified in the sftp command takes effect only on the current SFTP connection. If you specify the source IPv4 address both in this command and the sftp command, the source IPv4 address specified in the sftp command takes effect.
If you execute this command multiple times, the most recent configuration takes effect.
Examples
# Specify 192.168.0.1 as the source IPv4 address for SFTP packets.
<Sysname> system-view [Sysname] sftp client source ip 192.168.0.1
Related commands
display sftp client source