ipsec { ipv6-policy | policy }

Use ipsec { ipv6-policy | policy } to create an IPsec policy entry and enter its view, or enter the view of an existing IPsec policy entry.

Use undo ipsec { ipv6-policy | policy } to delete an IPsec policy.

Syntax

ipsec { ipv6-policy | policy } policy-name seq-number [ isakmp | manual ]

undo ipsec { ipv6-policy | policy } policy-name [ seq-number ]

Default

No IPsec policies exist.

Views

System view

Predefined user roles

network-admin

mdc-admin

Parameters

ipv6-policy: Specifies an IPv6 IPsec policy.

policy: Specifies an IPv4 IPsec policy.

policy-name: Specifies a name for the IPsec policy, a case-insensitive string of 1 to 63 characters.

seq-number: Specifies a sequence number for the IPsec policy entry, in the range of 1 to 65535.

isakmp: Establishes IPsec SAs through IKE negotiation.

manual: Establishes IPsec SAs manually.

Usage guidelines

When you create an IPsec policy, you must specify the SA setup mode (isakmp or manual). When you enter the view of an existing IPsec policy, you do not need to specify the SA setup mode.

You cannot change the SA setup mode of an existing IPsec policy.

An IPsec policy is a set of IPsec policy entries that have the same name but different sequence numbers. In the same IPsec policy, an IPsec policy entry with a smaller sequence number has a higher priority.

If you specify the seq-number argument, the undo command deletes the specified IPsec policy entry. If you do not specify this argument, the undo command deletes the specified IPsec policy.

An IPv4 IPsec policy and IPv6 IPsec policy can have the same name.

Examples

# Create an IKE-based IPsec policy entry and enter the IPsec policy view. The policy name is policy1 and the sequence number is 100.

<Sysname> system-view
[Sysname] ipsec policy policy1 100 isakmp
[Sysname-ipsec-policy-isakmp-policy1-100]

# Create a manual IPsec policy entry and enter the IPsec policy view. The policy name is policy1 and the sequence number is 101.

<Sysname> system-view
[Sysname] ipsec policy policy1 101 manual
[Sysname-ipsec-policy-manual-policy1-101]

Related commands

display ipsec { ipv6-policy | policy }

ipsec apply