stop-accounting-buffer enable (HWTACACS scheme view)
Use stop-accounting-buffer enable to enable buffering of HWTACACS stop-accounting requests to which no responses have been received.
Use undo stop-accounting-buffer enable to disable buffering of HWTACACS stop-accounting requests to which no responses have been received.
Syntax
stop-accounting-buffer enable
undo stop-accounting-buffer enable
Default
The device buffers HWTACACS stop-accounting requests to which no responses have been received.
Views
HWTACACS scheme view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
This command enables the device to buffer an HWTACACS stop-accounting request to which no response has been received. The device resends the buffered request until it receives a server response or when the number of transmission attempts reaches the maximum (set by using the retry stop-accounting command). If no more attempts are available, the device discards the request. However, if you have removed an accounting server, stop-accounting requests destined for the server are not buffered.
Examples
# Enable buffering of HWTACACS stop-accounting requests to which no responses have been received.
<Sysname> system-view [Sysname] hwtacacs scheme hwt1 [Sysname-hwtacacs-hwt1] stop-accounting-buffer enable
Related commands
display stop-accounting-buffer (for HWTACACS)
reset stop-accounting-buffer (for HWTACACS)