display stop-accounting-buffer (for HWTACACS)
Use display stop-accounting-buffer to display information about buffered HWTACACS stop-accounting requests to which no responses have been received.
Syntax
display stop-accounting-buffer hwtacacs-scheme hwtacacs-scheme-name
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, a case-insensitive string of 1 to 32 characters.
Examples
# Display information about nonresponded stop-accounting requests buffered for HWTACACS scheme hwt1.
<Sysname> display stop-accounting-buffer hwtacacs-scheme hwt1 Total entries: 2 Scheme IP address Username First sending time Attempts hwt1 192.168.100.1 abc 23:27:16-08/31/2015 19 hwt1 192.168.90.6 bob 23:33:01-08/31/2015 20
Table 10: Command output
Field | Description |
---|---|
First sending time | Time when the stop-accounting request was first sent. |
Attempts | Number of attempts that were made to send the stop-accounting request. |
Related commands
reset stop-accounting-buffer (for HWTACACS)
retry stop-accounting (HWTACACS scheme view)
stop-accounting-buffer enable (HWTACACS scheme view)
user-name-format (HWTACACS scheme view)