stop-accounting-packet send-force

Use stop-accounting-packet send-force to enable forcibly sending stop-accounting packets. The device will send stop-accounting packets when users for which no start-accounting packets are sent go offline.

Use undo stop-accounting-packet send-force to disable forcibly sending stop-accounting packets.

Syntax

undo stop-accounting-packet send-force

Default

Forcibly sending stop-accounting packets is disabled. The device does not send stop-accounting packets when users for which no start-accounting packets are sent go offline.

Views

RADIUS scheme view

Predefined user roles

network-admin

mdc-admin

Usage guidelines

Typically, if the device does not send a start-accounting packet to the RADIUS server for an authenticated user, it does not send a stop-accounting packet when the user goes offline. If the server has generated a user entry for the user without start-accounting packets, it does not release the user entry when the user goes offline. This feature forces the device to send stop-accounting packets to the RADIUS server when the user goes offline for timely releasing the user entry on the server.

Examples

# In RADIUS scheme radius1, enable forcibly sending stop-accounting packets.

<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] stop-accounting-packet send-force

Related commands

display radius scheme

prev	up	next
stop-accounting-buffer enable (RADIUS scheme view)	home	timer quiet (RADIUS scheme view)