stop-accounting-buffer enable (RADIUS scheme view)
Use stop-accounting-buffer enable to enable buffering of RADIUS stop-accounting requests to which no responses have been received.
Use undo stop-accounting-buffer enable to disable the buffering feature.
Syntax
stop-accounting-buffer enable
undo stop-accounting-buffer enable
Default
The device buffers the RADIUS stop-accounting requests to which no responses have been received.
Views
RADIUS scheme view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
This command enables the device to buffer a RADIUS stop-accounting request that has no response after the maximum transmission attempts (set by using the retry command) have been made. The device resends the buffered request until it receives a server response or when the number of stop-accounting request transmission attempts reaches the upper limit. If no more attempts are available, the device discards the request. However, if you have removed an accounting server, stop-accounting requests destined for the server are not buffered.
Examples
# Enable buffering of RADIUS stop-accounting requests to which no responses have been received.
<Sysname> system-view [Sysname] radius scheme radius1 [Sysname-radius-radius1] stop-accounting-buffer enable
Related commands
display stop-accounting-buffer (for RADIUS)
reset stop-accounting-buffer (for RADIUS)