display radius statistics
Use display radius statistics to display RADIUS packet statistics.
Syntax
display radius statistics
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Examples
# Display RADIUS packet statistics.
<Sysname> display radius statistics Auth. Acct. SessCtrl. Request Packet: 0 0 0 Retry Packet: 0 0 - Timeout Packet: 0 0 - Access Challenge: 0 - - Account Start: - 0 - Account Update: - 0 - Account Stop: - 0 - Terminate Request: - - 0 Set Policy: - - 0 Packet With Response: 0 0 0 Packet Without Response: 0 0 - Access Rejects: 0 - - Dropped Packet: 0 0 0 Check Failures: 0 0 0
Table 5: Command output
Field | Description |
---|---|
Auth. | Authentication packets. |
Acct. | Accounting packets. |
SessCtrl. | Session-control packets. |
Request Packet | Number of request packets. |
Retry Packet | Number of retransmitted request packets. |
Timeout Packet | Number of request packets timed out. |
Access Challenge | Number of access challenge packets. |
Account Start | Number of start-accounting packets. |
Account Update | Number of accounting update packets. |
Account Stop | Number of stop-accounting packets. |
Terminate Request | Number of packets for logging off users forcibly. |
Set Policy | Number of packets for updating user authorization information. |
Packet With Response | Number of packets for which responses were received. |
Packet Without Response | Number of packets for which no responses were received. |
Access Rejects | Number of Access-Reject packets. |
Dropped Packet | Number of discarded packets. |
Check Failures | Number of packets with checksum errors. |
Related commands
reset radius statistics