spbm authentication send-only
Use spbm authentication send-only to disable authentication for incoming ISIS-SPB hello packets on an interface.
Use undo spbm authentication send-only to restore the default.
Syntax
spbm authentication send-only
undo spbm authentication send-only
Default
ISIS-SPB authenticates incoming ISIS-SPB hello packets on an interface if adjacency authentication (spbm authentication-mode) is configured.
Views
Layer 2 aggregate interface view
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Usage guidelines
Before you change adjacency authentication settings on a link, configure this command to prevent temporary authentication setting mismatch from causing loss of adjacencies.
For security purposes, restore the default to authenticate incoming ISIS-SPB hello packets after you change adjacency authentication settings on the link.
This command does not affect outgoing ISIS-SPB hello packets. When adjacency authentication is enabled, outgoing ISIS-SPB hello packets always contain authentication information.
Examples
# Disable authentication for incoming ISIS-SPB hello packets on HundredGigE 1/0/1.
<Sysname> system-view [Sysname] interface hundredgige 1/0/1 [Sysname-HundredGigE1/0/1] spbm authentication send-only
Related commands
spbm authentication-mode