display spbm unicast-pw
Use display spbm unicast-pw to display unicast PWs on a BEB.
Syntax
display spbm unicast-pw [ i-sid i-sid ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
i-sid i-sid: Specifies an I-SID in the range of 255 to 16777215. If you do not specify an I-SID, the command displays unicast PW information for all I-SIDs.
count: Specifies the total number of unicast PWs. If you do not specify this keyword, the command displays unicast PW information.
Examples
# Display all unicast PWs.
<Sysname> display spbm unicast-pw System ID I-SID B-MAC B-VLAN Port 000f.e201.0101 300 000f-e201-0101 100 000f.e201.0102 300 000f-e201-0102 100
# Display the total number of unicast PWs.
<Sysname> display spbm unicast-pw count Total entries: 2
Table 26: Command output
Field | Description |
---|---|
System ID | System ID of the remote BEB. |
I-SID | SPBM VSI identifier. |
B-MAC | Unicast B-MAC of the remote BEB. |
B-VLAN | B-VLAN for tunneled frames. |
Port | Outgoing interface. |