display spbm unicast-fdb

Use display spbm unicast-fdb to display SPBM unicast FDB entries.

Syntax

display spbm unicast-fdb [ b-mac mac-address | b-vlan vlan-id | system-id system-id ] [ count ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

b-mac mac-address: Specifies a B-MAC address in H-H-H format. You can omit the consecutive 0s at the beginning of each segment. For example, you can enter f-e2-1 for 000f-00e2-0001. If you do not specify a B-MAC, the command displays unicast FDB entries for all B-MACs.

b-vlan vlan-id: Specifies a B-VLAN by its VLAN ID in the range of 1 to 4094. If you do not specify a B-VLAN, the command displays unicast FDB entries for all B-VLANs.

system-id system-id: Specifies a system ID in XXXX.XXXX.XXXX format. If you do not specify a system ID, the command displays unicast FDB entries for all system IDs.

count: Specifies the number of matching unicast FDB entries. If you do not specify this keyword, the command displays unicast FDB entries.

Usage guidelines

The SPBM unicast FDB contains unicast routes that ISIS-SPB calculates based on the SPBM LSDB.

If you do not specify any parameters, this command displays all unicast FDB entries.

Examples

# Display all SPBM unicast FDB entries.

<Sysname> display spbm unicast-fdb
Flags: E-Egress T-Transit

System ID            B-MAC            B-VLAN   Flags Port
0011.2200.0001       0011-2200-0001   9        T     HGE1/0/2
0011.2200.0001       0011-2200-0001   4        T     HGE1/0/2
0011.2200.0001       0011-2200-0001   5        T     HGE1/0/2

# Display the total number of SPBM unicast FDB entries.

<Sysname> display spbm unicast-fdb count
Total entries: 2