display spbm multicast-pw
Use display spbm multicast-pw to display multicast pseudo wires (PWs) on a BEB.
Syntax
display spbm multicast-pw [ i-sid i-sid ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
i-sid i-sid: Specifies an I-SID in the range of 255 to 16777215. If you do not specify an I-SID, the command displays multicast PW information for all I-SIDs.
count: Specifies the total number of multicast PWs. If you do not specify this keyword, the command only displays multicast PW information.
Examples
# Display all multicast PWs.
<Sysname> display spbm multicast-pw System ID I-SID MAC address B-VLAN Port 0011.2200.0101 300 0300-0a00-012c 10 HGE1/0/1 HGE1/0/2
# Display the total number of multicast PWs.
<Sysname> display spbm multicast-pw count Total entries: 2
Table 20: Command output
Field | Description |
---|---|
System ID | System ID of the remote BEB. |
I-SID | SPBM VSI identifier. |
MAC address | Destination multicast MAC address for frames to be tunneled. |
B-VLAN | B-VLAN to be encapsulated for frames to be tunneled. |
Port | Outgoing interfaces. |