control-address
Use control-address to configure the control MAC address for ISIS-SPB.
Use undo control-address to restore the default.
Syntax
control-address { all-cb | all-is | all-l1-is | all-l2-is | all-pb }
undo control-address
Default
The control MAC address for ISIS-SPB is 0180-C200-002E (all-pb).
Views
SPBM view
Predefined user roles
network-admin
Parameters
all-cb: Sets the control MAC address for ISIS-SPB to 0180-C200-002F.
all-is: Sets the control MAC address for ISIS-SPB to 0900-2B00-0005.
all-l1-is: Sets the control MAC address for ISIS-SPB to 0180-C200-0014.
all-l2-is: Sets the control MAC address to 0180-C200-0015.
all-pb: Sets the control MAC address to 0180-C200-002E.
Usage guidelines
ISIS-SPB uses a control MAC address for ISIS-SPB peer-to-peer communication. The control MAC specifies the destination MAC address for ISIS-SPB protocol frames.
Vendors might use different control MAC addresses. You can change the ISIS-SPB control MAC for interoperability in a multivendor network.
Examples
# Set the control MAC address for ISIS-SPB to 0900-2B00-0005 (all-is).
<Sysname> system-view [Sysname] spbm [Sysname-spbm] control-address all-is