Creating a sham link

1. Enter system view.

system-view

N/A

2. Enter OSPF view.

ospf [ process-id | router-id router-id | vpn-instance vpn-instance-name ] *

As a best practice, specify a router ID.

3. Set the external route tag for imported VPN routes.

route-tag tag-value

By default, if BGP runs within an MPLS backbone, and the BGP AS number is not greater than 65535, the first two octets of the external route tag are 0xD000 and the last two octets are the local BGP AS number. If the AS number is greater than 65535, the external route tag is 0.

4. Enter OSPF area view.

area area-id

N/A

5. Configure a sham link.

sham-link source-ip-address destination-ip-address [ cost cost-value | dead dead-interval | hello hello-interval | { { hmac-md5 | md5 } key-id { cipher | plain } string | keychain keychain-name | simple { cipher | plain } string } | retransmit retrans-interval | trans-delay delay | ttl-security hops hop-count ] *

By default, no sham links exist.