No TE LSA generated
Symptom
OSPF TE is configured but no TE LSAs can be generated to describe MPLS TE attributes.
Analysis
For TE LSAs to be generated, a minimum of one OSPF neighbor must reach FULL state.
Solution
To resolve the problem:
Use the display current-configuration command to verify that MPLS TE is configured on involved interfaces.
Use the debugging ospf mpls-te command to verify that OSPF can receive the TE LINK establishment message.
Use the display ospf peer command to verify that OSPF neighbors are established correctly.
If the problem persists, contact Hewlett Packard Enterprise Support.