Enabling SNMP notifications for MPLS TE

This feature enables generating SNMP notifications for MPLS TE upon MPLS TE state changes, as defined in RFC 3812. For MPLS TE event notifications to be sent correctly, you must also configure SNMP on the device. For more information about SNMP configuration, see the network management and monitoring configuration guide for the device.

To enable SNMP notifications for MPLS TE:

Step

Command

Remarks

1. Enter system view.

system-view

N/A

2. Enable SNMP notifications for MPLS TE.

snmp-agent trap enable te

By default, SNMP notifications for MPLS TE are enabled.