Configuring PCEP session parameters

1. Enter system view.

system-view

N/A

2. Enter MPLS TE view.

mpls te

N/A

3. Set the path calculation request timeout time.

pce request-timeout value

By default, the request timeout time is 10 seconds.

4. Set the PCEP session deadtimer.

pce deadtimer value

By default, the PCEP session deadtimer is 120 seconds.

5. Set the keepalive interval for PCEP sessions.

pce keepalive interval

By default, the keepalive interval is 30 seconds.

6. Set the minimum acceptable keepalive interval and the maximum number of allowed unknown messages received from the peer.

pce tolerance { min-keepalive value | max-unknown-messages value }

By default, the minimum acceptable keepalive interval is 10 seconds, and the maximum number of allowed unknown messages in a minute is 5.