Establishing a CRLSP by using the path calculated by PCEs
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter MPLS TE tunnel interface view. | interface tunnel tunnel-number [ mode mpls-te ] | N/A |
3. Establish a CRLSP by using the path calculated by PCEs. | mpls te path preference value dynamic pce [ ip-address ]&<0-8> | By default, the automatically calculated path is used to establish a CRLSP. After this command is executed, the local device acts as a PCC and establishes PCEP sessions to the specified PCEs. If you do not specify a PCE, the local device establishes PCEP sessions to all discovered PCEs. |