Enabling SNMP notifications for MPLS

To report critical MPLS events to an NMS, enable SNMP notifications for MPLS. For MPLS event notifications to be sent correctly, you must also configure SNMP on the device. For more information about SNMP configuration, see the network management and monitoring configuration guide for the device.

To enable SNMP notifications for MPLS:

Step	Command	Remarks
1. Enter system view.	system-view	N/A
2. Enable SNMP notifications for MPLS.	snmp-agent trap enable mpls	By default, SNMP notifications for MPLS are enabled.

prev	up	next
Specifying a hardware resource mode for MPLS-based ECMP forwarding	home	Displaying and maintaining MPLS