vpn popgo

Use vpn popgo to specify the VPN label processing mode as POPGO forwarding on an egress PE. In POPGO forwarding mode, the egress PE pops the label for each packet and forwards the packet out of the interface corresponding to the label.

Use undo vpn popgo to restore the default.

Syntax

vpn popgo

undo vpn popgo

Default

The VPN label processing mode is POP forwarding on an egress PE, which will pop the label for each packet and forward the packet through the FIB table.

Views

BGP instance view

Predefined user roles

network-admin

Usage guidelines

After you execute the vpn popgo command, the egress PE disconnects and re-establishes BGP sessions to re-learn VPN routes, and it does not support load sharing among VPN BGP peers.

Examples

# Specify the VPN label processing mode on the egress PE as POPGO forwarding.

<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp-default] vpn popgo