display ip vpn-instance
Use display ip vpn-instance to display information about VPN instances.
Syntax
display ip vpn-instance [ instance-name vpn-instance-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
instance-name vpn-instance-name: Specifies a VPN instance by its name, a case-sensitive string of 1 to 31 characters. If you do not specify a VPN instance, this command displays brief information about all VPN instances.
Examples
# Display brief information about all VPN instances.
<Sysname> display ip vpn-instance Total VPN-Instances configured : 1 VPN-Instance Name RD Create time abc 1:1 2011/05/18 10:48:17
Table 73: Command output
Field | Description |
|---|---|
VPN-Instance Name | Name of the VPN instance. |
RD | RD of the VPN instance. |
Create Time | Time when the VPN instance was created. |
# Display detailed information about VPN instance vpn1.
<Sysname> display ip vpn-instance instance-name vpn1
VPN-Instance Name and Index : vpn1, 2
Route Distinguisher : 100:1
VPN ID : 1:1
Description : vpn1
Interfaces : Vlan-interface2
Address-family IPv4:
Export VPN Targets :
2:2
Import VPN Targets :
3:3
Export Route Policy : outpolicy
Import Route Policy : inpolicy
Tunnel Policy : tunnel1
Maximum Routes Limit : 500
Threshold Value(%): 50