static-cr-lsp egress
Use static-cr-lsp egress to configure the egress node of a static CRLSP.
Use undo static-cr-lsp egress to delete the egress node configuration of a static CRLSP.
Syntax
static-cr-lsp egress lsp-name in-label in-label-value
undo static-cr-lsp egress lsp-name
Default
No static CRLSPs exist.
Views
System view
Predefined user roles
network-admin
Parameters
lsp-name: Specifies a name for the static CRLSP, a case-sensitive string of 1 to 15 characters.
in-label in-label-value: Specifies an incoming label. The value range for the in-label-value argument is 16 to 15999.
Usage guidelines
A static CRLSP must have a different incoming label than an existing static LSP. If they are the same, the static CRLSP is not available, even if you change the incoming label of the static LSP. To make the static CRLSP available, delete the static CRLSP, and reconfigure it with an unused incoming label.
Examples
# On the egress node, configure a static CRLSP with name static-te-1 and incoming label 233.
<Sysname> system-view [Sysname] static-cr-lsp egress static-te-1 in-label 233
Related commands
display mpls static-cr-lsp
static-cr-lsp ingress
static-cr-lsp transit