snmp-agent trap enable te
Use snmp-agent trap enable te to enable SNMP notifications for MPLS TE.
Use undo snmp-agent trap enable te to disable SNMP notifications for MPLS TE.
Syntax
snmp-agent trap enable te
undo snmp-agent trap enable te
Default
SNMP notifications for MPLS TE are enabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
This command enables generating SNMP notifications for MPLS TE upon MPLS TE tunnel status changes, as defined in RFC 3812. For MPLS TE event notifications to be sent correctly, you must also configure SNMP on the device. For more information about SNMP configuration, see the network management and monitoring configuration guide for the device.
Examples
# Enable SNMP notifications for MPLS TE.
<Sysname> system-view [Sysname] snmp-agent trap enable te