pce request-timeout
Use pce request-timeout to set the path calculation request timeout time.
Use undo pce request-timeout to restore the default.
Syntax
pce request-timeout value
undo pce request-timeout
Default
The request timeout time is 10 seconds.
Views
MPLS TE view
Predefined user roles
network-admin
Parameters
value: Specifies the request timeout time in the range of 5 to 100 seconds.
Usage guidelines
In EPC calculation, if a PCC does not receive a calculation reply within the configured timeout time, it resends calculation requests to the PCE until it receives a reply.
In BRPC calculation, if a PCC does not receive a calculation reply from the PCE within the configured timeout time, the PCC does not resend a request. If a PCE does not receive a calculation reply from its downstream PCE within the timeout time, it sends the local calculation result to its upstream device as a reply. The PCE does not wait for a reply from its downstream PCE.
Examples
# Set the request timeout time to 20 seconds.
<Sysname> system-view [Sysname] mpls te [Sysname-te] pce request-timeout 20
Related commands
display mpls te pce peer