pce deadtimer
Use pce deadtimer to set the PCEP session deadtimer.
Use undo pce deadtimer to restore the default.
Syntax
pce deadtimer value
undo pce deadtimer
Default
The PCEP session deadtimer is 120 seconds.
Views
MPLS TE view
Predefined user roles
network-admin
Parameters
value: Specifies the PCEP session deadtimer in the range of 0 to 255 seconds. Value 0 indicates that the PCEP session will never time out.
Usage guidelines
The local device sends the deadtimer setting to its peer. If the local device does not receive a PCEP message from its peer before the deadtimer expires, it tears down the PCEP session. Then, the local device tries to establish a new PCEP session to its peer.
The deadtimer must be greater than the keepalive interval.
Examples
# Set the PCEP session deadtimer to 180 seconds.
<Sysname> system-view [Sysname] mpls te [Sysname-te] pce deadtimer 180
Related commands
display mpls te pce peer
pce keepalive